0 Item(s)

Rigid Board Prints

ACM

Direct Print to 3mm ACM - Single Sided

ACM is a composite of two sheets of aluminum sandwiching a polyethylene core, providing an extremely rigid yet lightweight material that excels in indoor or outdoor signage. It is non-corrosive, food safe, fully machinable, and weather resistant. There is a $50 minimum for this service.


Applications:
 - Indoor and outdoor signage
 - Temporary or permanent exhibit installations
 - Construction signage and other architectural applications  

Acrylic

Direct Print to 1/8" NON-Glare Acrylic

If you would like additional services added to your order (materials, style etc.) please add to special instructions section.

Aluminum

Direct Print to .040 Aluminum - Single Sided

Our Aluminum has a base of white paint on both sides with a baked enamel finish which provides a long lasting and durable printing surface. Once printed, we can route and drill your print to meet your needs.

Applications:
 - Indoor and outdoor signage
 - Traffic & Safety Signage
 - Construction signage and other architectural applications

Brushed Aluminum

Direct Print to .040 Brushed Aluminum - Single Sided

Printing directly to brushed aluminum offers a modern aesthetic with a unique metallic sheen in highlights, durability through water and UV-resistant inks, and a professional look for graphics and signage. There is a $50 minimum order for this service.


Applications:
 - Indoor and outdoor signage
 - Temporary or permanent exhibit installations
 - Construction signage and other architectural applications

Converd

Direct Print to 3mm Converd Board - Single Sided

ConVerd Board is an environmentally responsible paper-based rigid board. This rigid paper board is a fully recyclable alternative for structural signage in the wide format marketplace. 

ConVerd Board offers a bright white dimensionally stable and rigid surface for indoor and short-term outdoor point-of-purchase and signage applications. The product incorporates 10% post-consumer waste to achieve maximum sustainability without sacrificing the print quality or surface characteristics required for critical POP applications. It is moisture-resistant and maintains superior stability during typical changes in temperature and humidity that tend to affect other rigid medias.

Applications:
 - Menu boards
 - Standees
 - Trade show signage
 - Indoor Point of Purchase
 - Displays
 - Hanging signage  

Coroplast

Direct Print to Coroplast - Single Sided

Coroplast plastic boards are essentially plastic cardboard, and are made from three layers of thin, polypropylene plastic substrate. The product consists of a zig-zagged layer of plastic sandwiched between two smooth layers of plastic sheeting – also known as twin-wall plastic sheeting. Coroplast’s layered structure makes corrugated plastic incredibly lightweight and shock absorbent.

Applications:
- Yard Signs
- Construction Signage
- Sandwich Board Inserts
- Temporary Directional Signage

Falconboard

Direct Print to 1/4" Falcon Board - Single Sided

Falcon Board is a rigid graphic display board made from reusable, renewable and 100% recyclable honeycomb material consisting in SFI certified, natural kraft core with white clay-coated or natural linerboard facings. Produced with up to 20% chlorofluorocarbon-free recycled paper content, Enviroboard emits less than 1% volatile organic compounds (VOCs). These characteristics make it an excellent “green” alternative to traditional synthetic rigid substrates keeping the quality capabilities required for wide format digital printing. It is rigid and durable, and the go-to substrate when you want to say “green” to your audience.

Applications:
 - Signs
 - Retail and POP Displays
 - Theatre backdrops
 - Exhibits

Foamcore

Direct Print to 3/16" Foamcore - Single Sided

Foam board is one of the most common presentation boards. It consists of three layers, an inner layer of fine celled polystyrene that is clad with white clay coated paper.

Applications:
 - Signage
 - Point of purchase displays
 - Craft works and special projects, as it is so easy to cut
 - Architectural models

Gatorboard

Direct Print to 3/16" Gator Board- Single Sided

Gator foam board is designed to be strong, durable, and ready for anything. This is achieved from its materials - polystyrene foam that is sandwiched between wood fiber veneer and melamine. As a result, gator boards are durable and unyielding.

 

Applications:

 - Hanging Signs
 - Way signage
 - Exhibits
 - Retail and POP displays

Matte Board

Direct Print to Matte Board - Single Sided

All cotton white Matte Board comes in 32" x 40" sheets.

MDO/Applewood

Direct Print to 1/2" MDO/Appleply - Single Sided

MDO/Applewood direct prints are printed on a prefinished board that provides superior longevity when compared to raw board. Along with the printed board we can provide delivery, posts and installation services. Add any information to the Special instructions section.

Signage Applications:

 - Construction
 - Directional

Sintra

Direct Print to 3mm Sintra - Single Sided

Sintra is a somewhat flexible, plastic board. It is dent, cut, scrape and weather resistant, which means your sign or board can be used and appear attractive and polished over time and even when exposed to the elements. It’s durability makes it great for long-term or re-usable applications.

 

Applications:

 - Indoor and outdoor signs
 - Trade shows
 - Photo booths
 - Real estate signage

Styrene

Direct Print to .020 Styrene

Styrene (also known as high impact polystyrene (HIPS) board) is a flexible, plastic board. It is made from closed-cell structure, making it durable, moisture resistant, and able to withstand a range of temperatures.

Applications:
- Signage
- Retail and POP Displays
- Architectural models
- ID BadgesDirect Print to .020 Styrene